Design Aeris Specifications download pdf (Page 20)

F11 OPERATING MANUAL

SERIAL NUMBER (SN)

• A (< 2 sec), while viewing Set Utilities Lead-in, - to access the Serial Number screen.

Information includes (Fig. 43):

> Graphic SN.

> Factory programmed Serial Number (up to 6 digits).

> Firmware (the unit's operating software) revision number (e.g., graphic r1A).

• A (< 2 sec) - to step forward to Chrono Lead-in.

• M (< 2 sec) - to step back to Set Utilities Lead-in

• M (2 sec), or 2 minutes of no button action, will revert to SURF MAIN.

• L (< 2 sec) - to toggle the Backlight On/Off.

Will be On for the duration time set.

• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.

This information will be required if a unit is sent to AERIS for evaluation or service. Record it in the table

provided in the back of this manual, and retain the sales receipt.

CHRONOGRAPH

The Chrono in FREE Mode is the same one used in Watch Mode and it carries over between modes when it is in operation.

Refer to Watch Mode (page 12) for details and displays.

Chrono Lead-in, information includes (Fig. 44):

> Graphics Go To CHro.

• S (< 2 sec) - to access Chrono Status.

• A (< 2 sec) - to step forward to SURF MAIN.

• M (< 2 sec) - to step back to SN.

• M (2 sec), or 2 minutes of no button action, will revert to SURF MAIN.

• L (< 2 sec) - to toggle the Backlight On/Off.

Will be On for the duration time set.

• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.

------------------------------------------------------------------------------------------------------------------------------------------------------------

LOG & HISTORY MODES

• A (2 sec), while Watch Main Time or FREE SURF Main is displayed, will access and step through Log and History modes.

Sequence: Main >> Day Log >> Full Log >> Day History >> Full History.

Day and Full Logs display information from the latest 99 dives.

The difference between the modes is that the information in Day Log is only retained until a dive is conducted on a new calendar

day, or the Dive # is reset to #1 (by A+S while viewing the SURF Main) at which time all data is deleted from the Day Log.

Full Log retains information until it is overwritten due to storage capacity.

After exceeding 99 dives, the most recent Dive will be recorded in the Full Log while deleting the oldest. It is highly unlikely that

this will affect the Day Log which will do the same if 99 is exceeded.

Dives are numbered 1 to 99. Numbering starts at #1 each new calendar day beginning after midnight, or when Reset (by A+S

while viewing the SURF Main).

In the event that a dive’s EDT exceeds 59:59 (min:sec), the data at the 59:59 interval will be recorded for the Log and History

upon surfacing of the unit.

History records information accumulated during the most recent day and adds that information to a full (all time) record.

Battery replacement will not to delete Log or History data.

At any time while in Log or History modes -

• M (2 sec) at any time while, or 2 minutes of no button action, will revert to the Watch Main or SURF MAIN screen.

• L (< 2 sec) - to toggle the Backlight On/Off.

Will be On for the duration time set.

• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.

Fig. 43 - SN

Fig. 44 - CHRONO

LEAD-IN

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Comments to this Manuals

No comments

Design Aeris Specifications Page 20

Comments to this Manuals

Related products and manuals for Scuba diving fins Design Aeris