Design Aeris Specifications Page 107
- Page / 112
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
107
Air Dive - A dive conducted using air (approximately 21% oxygen & 79% nitrogen) as the breathing gas.
Algorithm - A step-by-step mathematical formula designed to accomplish a particular result (i.e. Dive Time Remaining in the ATMOS
ai
).
Alternate Display - Additional information accessible by pressing a control button.
Altitude Dive - A dive made at an elevation above sea level (2,000+ ft. / 610+ m.) where a different set of no decompression tables is
used .
Ascent Rate - The speed that a diver ascends toward the surface.
Audible Alarm - A computer emitted tone that alerts the diver to potential danger.
Battery Indicator - An icon displayed while in Surface Mode, flashes to indicate a Low Battery Condition.
Caution Zone - The yellow sections of the Nitrogen Bar Graph , O2 Bar Graph, and Variable Ascent Rate Indicator that give a visual
warning of a divers proximity to decompression limits, oxygen tolerance limits, and ascent rate, respectively.
Ceiling - See decompression ceiling.
Clean Dive - A dive preceded by 24 hours of no diving activity.
CNS - Abbreviation for the Central Nervous System of the body.
Competitive Dive - A dive conducted for profit or prize.
Compartment - A term applied to the hypothetical modeling of nitrogen absorption in the tissues (more accurate than the term tissue
because dive computer models have no direct relation to human tissues).
DCS - Abbreviation for decompression sickness, i.e., the bends.
DECO - Abbreviation for Decompression.
Decompression Ceiling - The shallowest depth a diver may reach upon ascent without risking decompression sickness.
Decompression Stop - The depth(s) at which a diver must pause during ascent to allow absorbed nitrogen to escape naturally from the
tissues.
Depth Sensor - an electro-mechanical device that converts water pressure into an electrical signal, that is converted to a visual depth
display.
DEMO - Abbreviation for demonstration, a variety of modes that display sample dives.
Diagnostic Mode - The first display seen on dive computers after initial activation during which time a selfcheck for internal faults
is performed.
Display - A visual readout of information.
Dive DownLoader - An AERIS name for a PC interface hardware/software package.
Dive Log Mode - A computer display of previous dive information.
Dive Planner - A display of available dive times at 10 foot (3 meter) intervals from 30 to 160 feet. (9 to 48 meters) used when dive
planning.
Dive Time Remaining - A display of the time before a diver must surface based on no decompression status.
GLOSSARY
- OWNER'S GUIDE 1
- CONTENTS 3
- FEATURES and DISPLAYS 7
- Fig. 1 - Buttons and NiBG 9
- Fig. 2 - O2BG and VARI 10
- Fig. 3 - Pressure and Depth 11
- Fig. 4 - Time and Temperature 12
- Fig. 5 - Battery Indicator 15
- Fig. 6 - FO2 Air 16
- Fig. 7 - FO2 of 21% 16
- Fig. 8 - FO2 Default ON 17
- Fig. 9 - FO2 Default OFF 17
- Fig. 10 - No Decompression 18
- Dive Time Remaining 18
- Fig. 11 - O2 Accumulation 19
- Fig. 12 -Air Time Remaining = 20
- LCD LAYOUT 22
- ACTIVATION and SETUP 23
- Fig. 13 - Diagnostic Mode 24
- Fig. 14 - Surface Mode 25
- Fig. 15 - Surface Mode 25
- (rinse and dry the unit) 25
- Fig. 16 - Set Mode 1 26
- Fig. 17 - Set Mode 2 26
- Fig. 18 - Set FO2 27
- Fig. 19 - FO2 = 32% 27
- Fig. 20 - Set Depth Alarm 28
- Fig. 21 - Set Elapsed Time 29
- Fig. 22 - PC Interface 30
- Fig. 24 - Set Hour Format 32
- Fig. 26 - Set Minute 33
- Fig. 25 - Set Hour 33
- Fig. 27 - Set Year 34
- Fig. 29 - Set Day 34
- Fig. 28 - Set Month 34
- Fig. 30- Set Audible Alarm 35
- Graph Alarm 36
- Fig. 35 - Set Max PO2 Alarm 40
- Fig. 36 - Set FO2 Default 41
- Fig. 38 - Set Sampling Rate 43
- PRE DIVE PLAN MODE 47
- Fig. 42 - Oxygen Control 49
- Fig. 41 - Nitrogen Control 49
- DIVE MODES 51
- Fig. 43 - Bar Graphs 52
- Fig. 44 - No Deco #1 53
- Fig. 46- No Deco #3 54
- Fig. 45- No Deco #2 54
- Fig. 47 -Secondary Display 55
- Fig. 48 -Safety Stop 55
- Fig. 49 -Entry into DECO 56
- Fig. 50 -Deco #1 (Main) 57
- Fig. 51 -Deco #2 57
- Fig. 52 -Deco #3 58
- Full BG Flashing 60
- Flashing 61
- Gauge Mode (underwater) 62
- Full BGs Flashing 62
- Gauge Mode (after surfacing) 63
- Fig. 59 - PO2 Warning 64
- Fig. 60 - PO2 Alarm 64
- Fig. 61 - High O2 65
- Responsible 66
- Fig. 62 - Digital Gauge Mode 67
- Fig. 63 -Secondary Display 67
- POST DIVE MODES 69
- Fig. 64 - Transition Period 70
- Fig. 65 - Log Mode 71
- Fig. 66 - Surface Mode 72
- Fig. 67 - Plan Mode 72
- Fig. 68 - Time to Fly 73
- Fig. 69 - Time to Desaturate 73
- Fig. 70 - Log (1st screen) 75
- Fig. 72 - Log (3rd screen) 76
- Fig. 71 - Log (2nd screen) 76
- Fig. 73 - Fly Mode 77
- (Activation Contacts Wet) 77
- Fig. 74 - Desaturation Mode 77
- Fig. 75 - PC Interface 78
- SIMULATOR (DEMO) MODE 79
- Fig. 77 - Set Demo Gauge 80
- Fig. 76 - Simulator Mode 80
- Fig. 79 - Demo Surface Mode 81
- Fig. 81 -Simulated Descent 82
- Fig. 80 - Set Demo FO2 82
- Fig. 82 -Time Acceleration 83
- (descending) 83
- (Too Fast) 84
- Fig. 85 - Demo Surface Mode 85
- Fig. 86 - Real Surface Mode 85
- RESPONSIBLE COMPUTER DIVING 86
- Fig. 87 -Case Back 88
- Fig. 88 - Battery Hatch 91
- Fig. 89 - Battery Compartment 92
- Fig. 91 -Hatch Installed 93
- REFERENCE 95
- SPECIFICATIONS 102
- SPECIFICATIONS (CONTINUED) 103
- GLOSSARY 107
- GLOSSARY (CONTINUED) 108
- RESET FEATURE 111
- RESET PROCEDURE 111
© 2020, manymanuals.com. All rights reserved. | 1.595 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals