Design Aeris Specifications Page 49
- Page / 112
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
49
No decompression times are only displayed for depths where there
is at least 3 minutes of theoretical dive time available at the depth,
taking into account a descent rate of 60 feet (18 meters) per minute.
Depths greater than the maximum depth that can be achieved with a
PO2 of 1.60 ATA will not be displayed.
With each depth displayed by the Dive Planner, you will see either
predicted no decompression limits (NDLs) based upon your previous
dive profiles (if calculated to be nitrogen controlled), or predicted
oxygen tolerance limits (OTLs) based upon either a single dive expo-
sure or your 24 hour accumulation of oxygen (if calculated to be
oxygen controlled).
If the Nitrogen Bar Graph is displayed (Fig. 41), that next dive is
controlled by nitrogen loading calculations. If the O2 Bar Graph
and O2 symbol are displayed (Fig. 42), it is controlled by oxygen
loading calculations.
NOTE: The ATMOS
ai
will store oxygen accumulation cal-
culations for up to 10 dives conducted during a 24 hour
period. If the maximum limit for oxygen loading has been
exceeded for that day (24 hour period), all of the segments
of the O2 Bar Graph will be displayed flashing . Depth/
Time values will not appear until the O2 Bar Graph re-
cedes into the green (normal) zone (i.e., your daily oxygen
dosage decreases an amount equivalent to the amount
accumulated during the latest dive completed).
Fig. 42 - Oxygen Control
Fig. 41 - Nitrogen Control
- OWNER'S GUIDE 1
- CONTENTS 3
- FEATURES and DISPLAYS 7
- Fig. 1 - Buttons and NiBG 9
- Fig. 2 - O2BG and VARI 10
- Fig. 3 - Pressure and Depth 11
- Fig. 4 - Time and Temperature 12
- Fig. 5 - Battery Indicator 15
- Fig. 6 - FO2 Air 16
- Fig. 7 - FO2 of 21% 16
- Fig. 8 - FO2 Default ON 17
- Fig. 9 - FO2 Default OFF 17
- Fig. 10 - No Decompression 18
- Dive Time Remaining 18
- Fig. 11 - O2 Accumulation 19
- Fig. 12 -Air Time Remaining = 20
- LCD LAYOUT 22
- ACTIVATION and SETUP 23
- Fig. 13 - Diagnostic Mode 24
- Fig. 14 - Surface Mode 25
- Fig. 15 - Surface Mode 25
- (rinse and dry the unit) 25
- Fig. 16 - Set Mode 1 26
- Fig. 17 - Set Mode 2 26
- Fig. 18 - Set FO2 27
- Fig. 19 - FO2 = 32% 27
- Fig. 20 - Set Depth Alarm 28
- Fig. 21 - Set Elapsed Time 29
- Fig. 22 - PC Interface 30
- Fig. 24 - Set Hour Format 32
- Fig. 26 - Set Minute 33
- Fig. 25 - Set Hour 33
- Fig. 27 - Set Year 34
- Fig. 29 - Set Day 34
- Fig. 28 - Set Month 34
- Fig. 30- Set Audible Alarm 35
- Graph Alarm 36
- Fig. 35 - Set Max PO2 Alarm 40
- Fig. 36 - Set FO2 Default 41
- Fig. 38 - Set Sampling Rate 43
- PRE DIVE PLAN MODE 47
- Fig. 42 - Oxygen Control 49
- Fig. 41 - Nitrogen Control 49
- DIVE MODES 51
- Fig. 43 - Bar Graphs 52
- Fig. 44 - No Deco #1 53
- Fig. 46- No Deco #3 54
- Fig. 45- No Deco #2 54
- Fig. 47 -Secondary Display 55
- Fig. 48 -Safety Stop 55
- Fig. 49 -Entry into DECO 56
- Fig. 50 -Deco #1 (Main) 57
- Fig. 51 -Deco #2 57
- Fig. 52 -Deco #3 58
- Full BG Flashing 60
- Flashing 61
- Gauge Mode (underwater) 62
- Full BGs Flashing 62
- Gauge Mode (after surfacing) 63
- Fig. 59 - PO2 Warning 64
- Fig. 60 - PO2 Alarm 64
- Fig. 61 - High O2 65
- Responsible 66
- Fig. 62 - Digital Gauge Mode 67
- Fig. 63 -Secondary Display 67
- POST DIVE MODES 69
- Fig. 64 - Transition Period 70
- Fig. 65 - Log Mode 71
- Fig. 66 - Surface Mode 72
- Fig. 67 - Plan Mode 72
- Fig. 68 - Time to Fly 73
- Fig. 69 - Time to Desaturate 73
- Fig. 70 - Log (1st screen) 75
- Fig. 72 - Log (3rd screen) 76
- Fig. 71 - Log (2nd screen) 76
- Fig. 73 - Fly Mode 77
- (Activation Contacts Wet) 77
- Fig. 74 - Desaturation Mode 77
- Fig. 75 - PC Interface 78
- SIMULATOR (DEMO) MODE 79
- Fig. 77 - Set Demo Gauge 80
- Fig. 76 - Simulator Mode 80
- Fig. 79 - Demo Surface Mode 81
- Fig. 81 -Simulated Descent 82
- Fig. 80 - Set Demo FO2 82
- Fig. 82 -Time Acceleration 83
- (descending) 83
- (Too Fast) 84
- Fig. 85 - Demo Surface Mode 85
- Fig. 86 - Real Surface Mode 85
- RESPONSIBLE COMPUTER DIVING 86
- Fig. 87 -Case Back 88
- Fig. 88 - Battery Hatch 91
- Fig. 89 - Battery Compartment 92
- Fig. 91 -Hatch Installed 93
- REFERENCE 95
- SPECIFICATIONS 102
- SPECIFICATIONS (CONTINUED) 103
- GLOSSARY 107
- GLOSSARY (CONTINUED) 108
- RESET FEATURE 111
- RESET PROCEDURE 111
© 2020, manymanuals.com. All rights reserved. | 2.749 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals