Design Aeris Specifications Page 56
- Page / 112
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
56
DECOMPRESSION DIVE MODE
The ATMOS
ai
is designed to help you by providing a representation of how close you are to enter-
ing decompression. Decompression Dive Mode activates when theoretical No Decompression time/
depth limits are exceeded.
Entry into Decompression Dive Mode (Fig. 49)
Upon entering Decompression Mode, the Audible Alarm will sound and the red LED Warning Indi-
cator will flash for 10 seconds (unless set OFF), or until acknowledged.
At that time, you should begin a safe controlled ascent to a depth slightly deeper than, or equal to, the
Required Stop Depth indicated (Fig. 49a) and decompress for the Stop Time indicated (Fig. 49b).
The UP Arrow and Deco Bar will flash if you are greater than 10
feet (3 meters) deeper than the Required Ceiling Stop Depth.
While within 10 feet (3 meters) of, and below, the Stop Depth, both
Arrows and the Bar appear solid.
Other information includes:
Current Depth (Fig. 49c).
Total Ascent Time (Fig. 49d) - which includes Stop Times re-
quired at all ceilings and vertical Ascent Time calculated at 60 feet
(18 meters) per minute for depths deeper than 60 feet (18 meters),
and 30 feet (9 meters) per minute for depths of 60 feet (18 meters)
and shallower.
Fig. 49 -Entry into DECO
a
b
cd
- OWNER'S GUIDE 1
- CONTENTS 3
- FEATURES and DISPLAYS 7
- Fig. 1 - Buttons and NiBG 9
- Fig. 2 - O2BG and VARI 10
- Fig. 3 - Pressure and Depth 11
- Fig. 4 - Time and Temperature 12
- Fig. 5 - Battery Indicator 15
- Fig. 6 - FO2 Air 16
- Fig. 7 - FO2 of 21% 16
- Fig. 8 - FO2 Default ON 17
- Fig. 9 - FO2 Default OFF 17
- Fig. 10 - No Decompression 18
- Dive Time Remaining 18
- Fig. 11 - O2 Accumulation 19
- Fig. 12 -Air Time Remaining = 20
- LCD LAYOUT 22
- ACTIVATION and SETUP 23
- Fig. 13 - Diagnostic Mode 24
- Fig. 14 - Surface Mode 25
- Fig. 15 - Surface Mode 25
- (rinse and dry the unit) 25
- Fig. 16 - Set Mode 1 26
- Fig. 17 - Set Mode 2 26
- Fig. 18 - Set FO2 27
- Fig. 19 - FO2 = 32% 27
- Fig. 20 - Set Depth Alarm 28
- Fig. 21 - Set Elapsed Time 29
- Fig. 22 - PC Interface 30
- Fig. 24 - Set Hour Format 32
- Fig. 26 - Set Minute 33
- Fig. 25 - Set Hour 33
- Fig. 27 - Set Year 34
- Fig. 29 - Set Day 34
- Fig. 28 - Set Month 34
- Fig. 30- Set Audible Alarm 35
- Graph Alarm 36
- Fig. 35 - Set Max PO2 Alarm 40
- Fig. 36 - Set FO2 Default 41
- Fig. 38 - Set Sampling Rate 43
- PRE DIVE PLAN MODE 47
- Fig. 42 - Oxygen Control 49
- Fig. 41 - Nitrogen Control 49
- DIVE MODES 51
- Fig. 43 - Bar Graphs 52
- Fig. 44 - No Deco #1 53
- Fig. 46- No Deco #3 54
- Fig. 45- No Deco #2 54
- Fig. 47 -Secondary Display 55
- Fig. 48 -Safety Stop 55
- Fig. 49 -Entry into DECO 56
- Fig. 50 -Deco #1 (Main) 57
- Fig. 51 -Deco #2 57
- Fig. 52 -Deco #3 58
- Full BG Flashing 60
- Flashing 61
- Gauge Mode (underwater) 62
- Full BGs Flashing 62
- Gauge Mode (after surfacing) 63
- Fig. 59 - PO2 Warning 64
- Fig. 60 - PO2 Alarm 64
- Fig. 61 - High O2 65
- Responsible 66
- Fig. 62 - Digital Gauge Mode 67
- Fig. 63 -Secondary Display 67
- POST DIVE MODES 69
- Fig. 64 - Transition Period 70
- Fig. 65 - Log Mode 71
- Fig. 66 - Surface Mode 72
- Fig. 67 - Plan Mode 72
- Fig. 68 - Time to Fly 73
- Fig. 69 - Time to Desaturate 73
- Fig. 70 - Log (1st screen) 75
- Fig. 72 - Log (3rd screen) 76
- Fig. 71 - Log (2nd screen) 76
- Fig. 73 - Fly Mode 77
- (Activation Contacts Wet) 77
- Fig. 74 - Desaturation Mode 77
- Fig. 75 - PC Interface 78
- SIMULATOR (DEMO) MODE 79
- Fig. 77 - Set Demo Gauge 80
- Fig. 76 - Simulator Mode 80
- Fig. 79 - Demo Surface Mode 81
- Fig. 81 -Simulated Descent 82
- Fig. 80 - Set Demo FO2 82
- Fig. 82 -Time Acceleration 83
- (descending) 83
- (Too Fast) 84
- Fig. 85 - Demo Surface Mode 85
- Fig. 86 - Real Surface Mode 85
- RESPONSIBLE COMPUTER DIVING 86
- Fig. 87 -Case Back 88
- Fig. 88 - Battery Hatch 91
- Fig. 89 - Battery Compartment 92
- Fig. 91 -Hatch Installed 93
- REFERENCE 95
- SPECIFICATIONS 102
- SPECIFICATIONS (CONTINUED) 103
- GLOSSARY 107
- GLOSSARY (CONTINUED) 108
- RESET FEATURE 111
- RESET PROCEDURE 111
© 2020, manymanuals.com. All rights reserved. | 2.353 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals